Floors
How do I clean laminate and vinyl plank floors without damaging them?
Dry-clean often with a dust mop or a vacuum on the hard-floor setting (no beater bar). For laminate, use very little moisture: a laminate cleaner, or a well-wrung mop if the maker allows it, and never standing water. For luxury vinyl, use a neutral-pH cleaner and skip vinegar, ammonia and abrasives. Makers disagree, so check the floor's own care guide.
Why it happens
Grit tracked in on shoes scratches the wear layer, so dry cleaning does most of the work. Laminate makers warn against standing water and puddled mops, and vinyl makers warn that abrasive, ammonia-based, vinegar-based and harsh cleaners can damage the surface.
Dust mop or vacuum on the hard-floor setting
No reviews yet. Tried it? Be the first.
What you need
- Dust mop or broom
- Vacuum with a hard-floor attachment (not a rotating beater bar)
- Walk-off mats and felt furniture pads
Steps
- Sweep, dust-mop or vacuum regularly using the hard-floor attachment, not a beater bar.
- Put walk-off mats inside exterior doors to catch grit.
- Use felt protectors under furniture legs.
Where this comes from (3)
- Laminate Care (opens in a new tab) Shaw Floors
- Pergo Pro Laminated Wood Care and Repair (0014SE, 02/2021) (opens in a new tab) Pergo / Unilin North America (PDF hosted by Lowe's)
- Luxury Vinyl Care (opens in a new tab) Shaw Floors
Laminate: laminate floor cleaner, no wet mopping
No reviews yet. Tried it? Be the first.
What you need
- Cleaner made for laminate floors
- Plastic scraper or old credit card, ice (for gum or wax)
Steps
- Dry-clean the floor first.
- Apply a cleaner made for laminate as its label directs.
- Don't wash or wet-mop the floor with soap, water, oil soap or other liquid cleaners.
- For gum or candle wax, harden it with ice, scrape gently with a plastic card, then wipe with a damp cloth.
Where this comes from (1)
- Laminate Care (opens in a new tab) Shaw Floors
Laminate: well-wrung mop with plain water (only if the maker allows)
No reviews yet. Tried it? Be the first.
What you need
- Mop wrung out until barely damp
- Water
- If needed: 1 cup vinegar per gallon of water OR 1/3 cup non-sudsing ammonia per gallon of water
Steps
- Check the floor's care guide first; this method is from Pergo's guide for Pergo Pro.
- For heavier cleaning, occasionally mop with water only, using a well wrung-out mop.
- If needed, Pergo Pro's guide allows 1 cup vinegar per gallon of water OR 1/3 cup non-sudsing ammonia per gallon. Use one or the other, never both.
- Never pour liquid directly on the floor or leave puddles or standing moisture.
Where this comes from (3)
- Pergo Pro Laminated Wood Care and Repair (0014SE, 02/2021) (opens in a new tab) Pergo / Unilin North America (PDF hosted by Lowe's)
- Laminate Care (opens in a new tab) Shaw Floors
- Dangers of Mixing Bleach with Cleaners (opens in a new tab) Washington State Department of Health
Luxury vinyl: neutral-pH cleaner, rubbing alcohol for stubborn spots
No reviews yet. Tried it? Be the first.
What you need
- Neutral-pH floor cleaner
- Clean white cloths
- Isopropyl (rubbing) alcohol
- Fan or air mover (optional)
Steps
- Sweep or dust-mop daily to remove grit. Blot spills right away with a clean, white, absorbent cloth or paper towel.
- Clean weekly. Periodically wet-clean with a neutral-pH cleaner after vacuuming or dusting.
- If you rinse, speed drying with a fan or air mover.
- For spots that water and cleaner won't remove, use isopropyl alcohol on a clean white cloth.
Where this comes from (2)
- Luxury Vinyl Care (opens in a new tab) Shaw Floors
- Hazard Alert: Dangerous Chemical Combinations - Do Not Mix (opens in a new tab) New Jersey Department of Health
Know a better way?
Suggest a solution we haven't listed. We check every suggestion against a trusted source before adding it.