Carpet & upholstery

How do I clean pet urine out of carpet and get rid of the smell?

Blot up as much as you can right away, rinse the spot with cool water and blot or wet-vac it dry, then treat it with a pet stain-and-odor product. Never steam clean urine: heat can permanently set the stain and smell. Skip ammonia and vinegar, which can encourage the pet to use the same spot again.

4 solutions · no reviews yet · sources checked

Why it happens

Urine soaks through carpet into the backing and pad. Cleaning can remove the visible stain but leave odor, and if the pet can still smell it, it may go back to the same spot. Humane World says the heat from steam cleaning can permanently set the stain and odor in man-made fibers.

Order the solutions by

Blot hard, then rinse with cool water

No reviews yet. Tried it? Be the first.

What you need

  • Thick stack of paper towels
  • Newspaper
  • Cool, clean water
  • Wet vacuum (optional)

Steps

  1. Lay a thick layer of paper towels over the wet spot with newspaper on top. Stand on it for about a minute. Repeat until the area is barely damp.
  2. Rinse the spot thoroughly with clean, cool water.
  3. Blot dry again, or extract the water with a wet vacuum.
Where this comes from (2)

Pet stain-and-odor remover or odor neutralizer

No reviews yet. Tried it? Be the first.

What you need

  • Pet stain-and-odor product (CRI lists Seal of Approval products in this category)
  • White cloths

Steps

  1. After rinsing, apply a pet stain-and-odor product or a high-quality pet odor neutralizer.
  2. Follow its label for how much to use and how long to leave it.
  3. Once the area is completely dry, use a carpet stain remover if a stain is still visible.
Where this comes from (3)

Wet vac or rented carpet extractor with cool water (no steam)

No reviews yet. Tried it? Be the first.

What you need

  • Wet vacuum or rented carpet extractor
  • Cool water

Tips

  • Small hand extractors are handy for quick cleanups but don't replace periodic deep cleaning (CRI).

Steps

  1. For set-in spots, use a wet vac or a carpet cleaner rented from a hardware or grocery store.
  2. Rinse with cool water and extract. Don't use steam or hot water.
  3. Let the area dry completely before treating any remaining odor or stain.
Where this comes from (2)

Find hidden old spots with a black light

No reviews yet. Tried it? Be the first.

What you need

  • Black light (UV flashlight)
  • Chalk

Steps

  1. Sniff for soiled areas and look closely at suspect spots.
  2. Darken the room and scan the carpet with a black light.
  3. Outline each spot lightly with chalk.
  4. Treat each marked spot with the steps above.
Where this comes from (1)

Know a better way?

Suggest a solution we haven't listed. We check every suggestion against a trusted source before adding it.

Tools and links for this job

Related questions

Review:

Reviews are public. Please leave out names, addresses, phone numbers and links. Review rules (opens in a new tab)

How well did it work? Required
Would you use it again? Required

Report this review

A review is hidden for a staff check once three different people report it. We never remove a review just for its rating.

What's wrong?

Suggest a solution

Suggestions aren't published straight away. We check each one against a trusted source first.

A resource from the people who run this site

You clean. Spiffy Office handles the rest.

Back-office software for cleaning businesses: your own booking website, scheduling and dispatch, team logins with before-and-after photos, card payments with pay splits, client reviews, messaging, and expenses.

See Spiffy Office