Bathrooms

How do I remove soap scum from a tub, shower or tile?

Use a tub/tile/sink cleaner or a non-abrasive all-purpose cleaner and give it time to work before wiping. A baking soda paste is a gentle option on plastic and fiberglass. On natural stone, use only a non-acidic soap scum remover. Wiping walls dry after each shower keeps it from building up.

4 solutions · no reviews yet · sources checked

Why it happens

Soap scum is a film of soap residue and hard-water minerals that builds up on wet surfaces and holds on to grime. Many bathroom surfaces (fiberglass, plastic, acrylic, stone and coated glass) scratch, dull or etch easily, so the cleaner has to match the surface.

Order the solutions by

Tub/tile/sink cleaner or non-abrasive all-purpose cleaner

No reviews yet. Tried it? Be the first.

What you need

  • Tub/tile/sink cleaner or non-abrasive all-purpose cleaner
  • Non-scratch sponge
  • Dry cloth

Tips

  • Wiping tiled shower walls with a towel after each use keeps soap scum and hard-water deposits from building up.

Steps

  1. Apply the cleaner, diluted or full strength as its label directs.
  2. On plastic tubs and shower stalls with heavy soil, let it sit on the surface for at least 30 seconds.
  3. Rub with a sponge, then rinse thoroughly.
  4. Buff tile walls dry with a cloth to prevent water spots.
Where this comes from (2)

Baking soda and water paste (plastic and fiberglass)

No reviews yet. Tried it? Be the first.

What you need

  • Baking soda
  • Water
  • Soft sponge

Steps

  1. Mix baking soda with a little water to make a paste.
  2. Rub it gently over the soap scum with a soft sponge.
  3. Rinse or wipe clean.
Where this comes from (1)

Acid-based bathroom or tile cleaner (scum mixed with hard-water deposits)

No reviews yet. Tried it? Be the first.

What you need

  • Acid-based bathroom cleaner, or an acidic cleaner made for ceramic and porcelain tile
  • Non-scratch sponge
  • Gloves

Tips

  • LATICRETE treats acidic tile cleaners as an occasional restoration step, not a routine cleaner.

Steps

  1. Use on porcelain, fiberglass, or ceramic and porcelain tile when soap scum is mixed with hard-water deposits or rust scale.
  2. Apply as the label directs and leave it on for the time the label gives.
  3. Scrub with a non-scratch sponge and rinse thoroughly.
Where this comes from (4)

Non-acidic soap scum remover or dilute ammonia (natural stone showers)

No reviews yet. Tried it? Be the first.

What you need

  • Non-acidic soap scum remover labeled safe for stone, OR about 1/2 cup ammonia in 1 gallon of water
  • Soft cloth or sponge
  • Squeegee

Steps

  1. Apply the non-acidic soap scum remover as its label directs, or use the dilute ammonia solution.
  2. Wipe, rinse with clean water and dry.
  3. Use a squeegee after each shower to limit new soap scum.
Where this comes from (2)

Know a better way?

Suggest a solution we haven't listed. We check every suggestion against a trusted source before adding it.

Tools and links for this job

Related questions

Review:

Reviews are public. Please leave out names, addresses, phone numbers and links. Review rules (opens in a new tab)

How well did it work? Required
Would you use it again? Required

Report this review

A review is hidden for a staff check once three different people report it. We never remove a review just for its rating.

What's wrong?

Suggest a solution

Suggestions aren't published straight away. We check each one against a trusted source first.

A resource from the people who run this site

You clean. Spiffy Office handles the rest.

Back-office software for cleaning businesses: your own booking website, scheduling and dispatch, team logins with before-and-after photos, card payments with pay splits, client reviews, messaging, and expenses.

See Spiffy Office